Comments on: Sun X4100 and Sun X4200 iLOM setup http://www.geniv.net/sun-x4100-and-sun-x4200-ilom-setup/2010/05/ Tech Gadgets News Wed, 03 Aug 2011 18:22:16 +0000 hourly 1 http://wordpress.org/?v=3.2 By: Bhuvanendran http://www.geniv.net/sun-x4100-and-sun-x4200-ilom-setup/2010/05/comment-page-1/#comment-616 Bhuvanendran Tue, 12 Oct 2010 22:00:37 +0000 http://www.geniv.net/?p=868#comment-616 Hi Sundar, Try with combo key Esc + ( You will get the --> SP prompt From there you can run the following command to get Network details -> show /SP/network Its like Mini OS ( Unix ) you can roam by using cd , ls like standard command "set - to configure" "show - to list " :) Hi Sundar,
Try with combo key Esc + ( You will get the –> SP prompt

From there you can run the following command to get Network details

-> show /SP/network

Its like Mini OS ( Unix ) you can roam by using cd , ls like standard command “set – to configure” “show – to list ” :)

]]> By: admin http://www.geniv.net/sun-x4100-and-sun-x4200-ilom-setup/2010/05/comment-page-1/#comment-464 admin Thu, 23 Sep 2010 18:33:12 +0000 http://www.geniv.net/?p=868#comment-464 Once connected to the serial port and at the console prompt, all you need to do is change the directory with the 'CD' command. e.g.<strong> cd /SP/network</strong> There are no default IP address for ILOM. It all depends on how the user set it up. Once connected to the serial port and at the console prompt, all you need to do is change the directory with the ‘CD’ command. e.g. cd /SP/network

There are no default IP address for ILOM. It all depends on how the user set it up.

]]> By: sundar http://www.geniv.net/sun-x4100-and-sun-x4200-ilom-setup/2010/05/comment-page-1/#comment-462 sundar Thu, 23 Sep 2010 04:23:13 +0000 http://www.geniv.net/?p=868#comment-462 When I connect to Serial port to access the ILOM, I get a console login prompt. How do I get to SP login prompt? I have tried the #. key combination but failed to access it. I don't knwo the ip of IP for the web interface to access ILOM. Is there a default IP? When I connect to Serial port to access the ILOM, I get a console login prompt. How do I get to SP login prompt? I have tried the #. key combination but failed to access it. I don’t knwo the ip of IP for the web interface to access ILOM. Is there a default IP?

]]>