Linux and Unix OS Archive

How to crack WEP?

Posted on January 6, 2009 | No Comments
Tweet How to crack WEP video? Tweet
Full Story
Linux Server for ISPs and Hosters, What should be in it?

Posted on January 6, 2009 | No Comments
Tweet Linux Server for ISPs and Hosters, What should be in it? Here’s a list of software that should be installed on your linux server. 1 – Linux ( Any version of Linux ) 2 – Web Server : Apache 2.2 3 – Database :...
Full Story
How to install VMware on Ubuntu Server?

Posted on January 6, 2009 | No Comments
Tweet How to install VMware on Ubuntu Server? libraries for vmware Code: sudo apt-get install libx11-6 libx11-dev libxtst6 libxrender1 libxt6 zlib1g Once, you have all the necessary libraries installed. You can just do a normal installation to vmware and the installation will go through. Tweet
Full Story
I forgot my root password, how can I get into my system?

Posted on January 6, 2009 | No Comments
Tweet I forgot my root password, how can I get into my system? Q: I forgot my root password, how can I get into my system? A: You can reset forgotten root password under Linux by booting system into single user mode or emergency mode...
Full Story
How to uninstall Ubuntu on a computer with Windows XP in it?

Posted on January 6, 2009 | No Comments
Tweet How to uninstall Ubuntu on a computer with Windows XP in it? You can use the “Disk Managerment” inside “Computer Management” to delete the Ubuntu partition. Tweet
Full Story
What do I do if there are bad blocks on my hard drive?

Posted on January 6, 2009 | No Comments
Tweet What do I do if there are bad blocks on my hard drive? For IDE drives: If there are bad blocks on the drive, this usually an indication that the drive it going bad. Now a day, all IDE drives come with internal bad...
Full Story
Unable to get the last modification timestamp of the destination file, VMWare Installation Errors

Posted on January 6, 2009 | 1 Comment
Tweet Unable to get the last modification timestamp of the destination file, VMWare Installation Errors If you are getting the error message below. Try the solution posted. It worked for me. Installing the VMware VmPerl Scripting API. The installation of the VMware VmPerl Scripting API...
Full Story
How to check the port speed and duplex setting?

Posted on January 6, 2009 | No Comments
Tweet How to check the port speed and duplex setting? To verify the port speed and duplex setting on a Linux machine, do the following: Type mii-tool in the command prompt. Output: eth0: negotiated 10baseT-FD, link ok The output shows that it is connected on...
Full Story

Tech Ads

Recent Posts
Categories
Latest Tech News
Latest Viruses
- Troj/Mdrop-DKE
- Troj/Sasfis-O
- Troj/Keygen-FU
- Troj/Zbot-AOY
- Troj/Zbot-AOW
- W32/Womble-E
- Troj/VB-FGD
- Troj/FakeAV-DFF
- Troj/SWFLdr-W
- W32/RorpiaMem-A

Linux and Unix OS Archive

Tech Ads

Recent Posts

Categories

Latest Tech News

Latest Viruses